The Tour Hazer II is a Hazer with experience on stages all over the world.
Detailed information is available at www.tourhazer.de.
Due to the water-based fluid, a clean production of fine Haze is possible. The special fluid of the Tour Hazer allows us to minimize the consumption of the device. So the Tour Hazer II needs only 1 ml/min for 40% performance. A 5ltr. canister Tour Hazer Fog is therefore sufficient for 83 hours, i.e. 3.5 days of continuous Haze. On a lower setting, running times of up to 5 days of continuous Haze can be achieved with a 5 litre canister.
Two DMX channels allow an individual effect that can be regulated from very fine, barely visible Haze to fog-like output.
Thanks to the proven Amptown Touringcase, the device can be set up within just a few seconds after removing the casing lid. Just 60 seconds after plugging in the power cord, the Tour Hazer II is heated up and ready for use.
Amptown has been finishing the cases for the Tour Hazer II since the first Tour Hazer version in 2000. They are characterized by an extremely high load capacity and are ideal for the hard touring everyday life with 200+ jobs per year.
Another advantage of the Casedesigns is a start-up, in almost every position. Only on the side with the leather inlet, the device should not be tilted during operation. This means that the Tour Hazer II can also be optimally placed on small stages.
With the variable air baffle, the Haze can still be directed in the desired direction.
The use of high-quality materials guarantees a long service life of the device.
Only the Tour Hazer Fluid should be used in order to use the device effectively and to maintain its long service life!
If original fluid is used, we grant 3 years warranty on our devices.
Made in Germany
Additional information
Power |
1500Watt |
---|---|
Suspense |
240 V/50 Hz (also available as 110V version) |
fog season |
Permanent fog at 100% |
heating time |
~ 60 sec. |
fluid consumption |
8,9 ml/min. (max.output) | 1,0 ml/min. (40%) |
control options |
DMX 512, Stand-Alone, Timer (integrated), Analog 0-10V (cable remote control or radio remote control available as accessories), W-DMX (optional) |
Weight | Dimensions |
16, 5 Kg 55 x 26, 5 x 41, 5 cm |
2 DMX channels for very fine haze or fog-like output
The Tour Hazer II is controlled by two DMX channels. So it is possible to control the internal fan and the Haze-Output independently. With the help of the fan of the Haze produced can be widely distributed in the venue, and it does not require C02 or anything similar for operation.
No residue for lasting memories
Oily residues belong to the past. Thanks to the high-quality water-based Tour Hazer fluid you need not worry about residue on stage or in other equipment. Save yourself the time on cleaning and concentrate on the essentials. Create the perfect light show for your guests to marvel about.
Flexible in all positions
„Behind the drummers are only 30 cm of space!“ „No Problem, simply tilt the Hazer on its side!“
Thanks to the closed and robust hose system inside the Tour Hazer it can be tilted and operated on eather side. If you want to direct the haze directly towards the ground, it does not matter if it is laying on its side or completely upside down. Only the side where the air vent is located should remain exposed, and the direction of the haze can easily be changed due to the 45° adjustable air baffle.
Just a little bit more to connect.
Thanks to the PowerCon TRUE1 connector, short cables are a thing of the past. If necessary, you can easily connect a longer cable with a PowerCon TRUE1 plug.
Neutrik connectors are known for their extreme robustness and reliability. The locking system prevents accidental removal of the plug while connected to the power source and eliminates the danger of shock.
The classical touring unit
Since the first version in 2000, the Tour Hazer has been developed for mobile use utilizing robust components and a case that contains all required materials which can withstand the impact of a fall from a loading dock. Plug it in and let the show begin.
„S“
Standard Case
Vintage Look
Since 2006, the Tour Hazer has been available in the „Standard Case“ or „Vintage Look“ version. Made in Germany, these cases are ideal to withstand the rugged wear and tear of touring. Reinforced by ball corners and heavy duty hardware, the Tour Hazer is well prepared for transport on tour.
„SF“
BLACK
Back in Black.
Also manufactured in Germany, the Tour Hazer II „SF“ Black comes with black lamination. It is well prepared for tough on stage performances without looking „down rocked“ afterwards.
„A“
Amptown
The high-end version of the Tour Hazer II is presented in an Amptown Case. With thicker wood and robust profiles, it is the ideal partner for a world tour or the bulk distributor with more than 300 operating calendar days.
Touring or fixed installation
Perfect, whether you wish to utilize our Tour Hazer on a large world tour, or as a sole unit on a musical stage. We are flexible.
Tour Hazer II „BOXED“
No profiles, no boxed lid. The Tour Hazer in its smallest and simplest version. Ideal for theaters, permanent installations in discotheques, laser tag halls or for mobile DJ’s require no touring unit. The canister slot can accommodate a 3ltr. Canister of Tour Hazer fluid which can generate up to 72 hours continuous haze on reduced output.
Consumption
Due to the water-based fluid, a clean production of fine Haze is possible. The special fluid of the Tour Hazer allows us to minimize the consumption of the device. So the Tour Hazer II needs only 1 ml/min for 40% performance. A 5ltr. canister Tour Hazer Fog is therefore sufficient for 83 hours, i.e. 3.5 days of continuous Haze. On a lower setting, running times of up to 5 days of continuous Haze can be achieved with a 5 litre canister.
Super Silent
The high-quality components in the Tour Hazer II make an extremely quiet operation possible. The air pump regulates itself automatically during operation, and depending on the amount of fluid consumption the Hazer will operate much quieter.
Self-Cleaning Mode
With the Tour Hazer II in “off mode”, it is able to clean itself when the show is finished. The “off mode” can either be started manually or will automatically start after the DMX console is turned off for several seconds activating the built-in air pump to clean the heater and hoses thus ensuring a long life of the components.