Avaleht ➤ Pood ➤ Helitehnika ➤ Kõlarid ➤ Passiivkõlarid ➤ RCF C 3108-126

RCF C 3108-126

Ettetellimisel

2 way speaker sys. – 8″ – 1″ – 120×60° – 300W

Tootekood: 13000282 Kategooria:
Get offer
×

    Uuri tarneaega
    ×

      Küsi abi

      Ross

      [email protected]

      +372 5699 7759

      Tasuta tarne, kui e-poe tellimuse summa ületab 139€
      14-päevane raha tagasi garantii
      Kui kaup on laos, saad toote kätte järgmisel tööpäeval!

      The C3108-126 Two-Way Passive Speaker System from RCF features Constant Matching Design technology for optimal transition between the high frequency horn polar pattern and the low frequency woofer directivity. The horn can be rotated, allowing the loudspeaker to be installed either vertically or horizontally. The high-frequency transducer in this system is a 1″ compression driver with 1.5″ voice coil for smooth, wide dispersion. The low-frequency transducer is an 8″ woofer with a 2″ voice coil.

      The system includes a high-level crossover network that features the LICC (Low Impedance Compensated Crossover) that offers delay reduction, reduced phase shift, and superior transient response. Dynamic high-frequency driver protection is accomplished with the Active Mosfet Compression Driver Protection System (AMCDP) that complements the driver power curve.

      The cabinet is made of Baltic birch and is equipped with top and bottom ‘multiplates’ for either wall or suspended mounting with chains. The steel front grille is protected with a double layer polyurethane fabric. Connections are made through two Neutrik Speakon NL4 connectors (audio input and parallel link output). This passive speaker system is suitable for use in permanent installations, main reinforcement in small spaces, high-level AV playback, zone delay and fill systems, and under balcony installations.

      Features an 8″ high-output woofer and a 1″ compression driver
      120 x 60° CMD (Constant Matching Design) constant directivity horn
      Rotatable horn for horizontal mounting
      Trapezoidal enclosure made of 12mm birch plywood
      HF driver with Active Mosfet Compression Driver Protection (AMCDP)
      Low Impedance Compensated Crossover (LICC)
      Rigging inserts: 6 x M8 (rear), 2 x M10 (lateral)
      Two multiplates (top and bottom) for either wall or suspended mounting with chains
      Installation points on rear panel
      Easily rotatable front RCF logo
      System
      Frequency Response 70 Hz to 20 kHz @ -10 dB
      Coverage Angle Horizontal (-6 dB): 120°
      Vertical (-6 dB): 60°
      Directivity Factor Q: 10
      Sensitivity 1 W, 3.3′ (1.0 m): 94.5 dB
      Maximum SPL Peak Power, 3.3′ (1.0 m): 125.5 dB
      Impedance 8 Ω
      Power RMS: 300 W
      Peak: 1200 W
      Protection Dynamic HF protection
      Crossover 2 kHz
      Transducers
      Type Low Frequency: 8.0″ (20.3 cm) woofer with 2.0″ (5.1 cm) voice coil
      High Frequency: 1.0″ (2.5 cm) driver with 1.5″ (3.8 cm) voice coil
      Impedance 8 Ω
      Power Low Frequency Range: 200 W (AES), 400 W (peak)
      High Frequency Range: 25 W (AES), 50 W (peak)
      Sensitivity 1 W, 3.3′ (1.0 m)
      Low Frequency Range: 94 dB
      High Frequency Range: 106 dB
      Physical
      Enclosure Trapezoidal, 20° side angles, 0.5″ (12 mm) birch plywood construction
      Insert Rigging Inserts: 6 x M8 (rear), 2 x M10 (lateral), multiplates (top and bottom)
      Grille Perforated powder-coated steel covered with double layer polyurethane fabric
      Input Connectors 2 x SPEAKON NL4
      Dimensions 9.5 x 16.8 x 10.3″ (24.2, 42.7, 26.3 cm)
      Weight 29.9 lb (12.2 kg)
      Packaging Info
      Box Dimensions (LxWxH) 20 x 15 x 13″