Specification:
Image
- 10,500 ANSI lumens
- 11,550 center lumens 10,625 ISO lumens
- 2,500-10,000:1 FOFO
- 650:1 ANSI
- Contrast aperture
- 80% brightness uniformity
Display technology and resolution
- 3DLP 0.96″
- Native WUXGA 1920 x 1200
- Frame delay: As little as one frame
Input signal compatibility
- Native dual-link DVI-D
- Frame-doubled 3D – dual-link DVI
- Pixel clock: 330 Mhz
- Scan rates: Horizontal – 15 to 120 kHz / Vertical – 23.97 to 150 Hz (up to 120Hz maximum output)*
Inputs, control & networking
- RS232 in/out
- RS422 in
- Ethernet (10/100)
- USB device
- GPIO (RS232 9-pin male connector)
- Built-in backlit LCD keypad
- Remote control (with optional wired XLR connection)
- Slot 1-2 standard (populated): dual-link DVI-D (330MHz) and VGA (165MHz)
- Slots 3-4 are available for option cards
Optional input modules
- Full bandwidth analog BNC
- Dual-link DVI input card (330MHz), \- VGA (165MHz)
- Dual SD/HD-SDI
- Video decoder
- Twin HDMI
Optical system
Lens mount:
- Motorized horizontal and vertical lens offset
- Scheimpflug (tilt) adjustment
- Built-in light shutter
- Tool-free lens insertion system Illumination
- Dual P-VIP 350W lamps
- Lamp life (typical): 1500 hrs @ 350W, 2000 hrs @ 300W
Lenses – standard or optional
Fixed
- Christie ILS lens 0.73:1 SX+ / 0.67:1 HD*
- Christie ILS lens 1.2:1 SX+ / 1.1:1 HD
Zoom
- Christie ILS lens 1.25-1.6:1 SX+ / 1.16-1.49:1 HD**
- Christie ILS lens 1.5-2.0:1 SX+ / 1.4-1.8:1 HD
- Christie ILS lens 2.0-2.8:1 SX+ / 1.8-2.6:1 HD
- Christie ILS lens 2.8-4.5:1 SX+ / 2.6-4.1:1 HD
- Christie ILS lens 4.5-7.5:1 SX+ / 4.1-6.9:1 HD
- Christie ILS lens 7.5-11.2:1 SX+ / 6.9-10.4:1 HD
Offsets
- +/- 112% Vertical
- +/- 42% Horizontal
- (* +/-22%V +/- 6%H)
- (** +/-82%V +/-38%H)
Advanced feature set
- Embedded Christie Twist™ – internal advanced warping and edge-blending
- LiteLOC™
- Contrast aperture
- Dust-sealed, filter-free design
- Reduced power requirements (as compared to competitive products on the market today) – at maximum brightness the unit only draws 1320W; standby power consumption (phantom power draw) is less than 20W
- Reduced noise levels
- LCD keypad – active keys are amber to indicate whether function selected will be seen by the audience
- Motorized yellow notch filter
- Built-in portrait display capabilities*
*Christie M Series stacking frame is required in portrait orientation.
Power requirements
- 100 VAC to 240 VAC @ 50/60 Hz
- Power consumption: 1320W maximum
- Thermal dissipation: 4,508 BTU/hr
- Operating current: 12 @ 100V
Dimensions (excluding lens)
- Weight: 55 lb (25 kg) without lens
- Shipping weight: 87 lb (38 kg)
- Size: 19.7″ W x 22.1″ L x 10.2″ H (500mm W x 561mm L x 259mm H)
Standard accessories
- User manual
- IR remote
- Twin DisplayPort input card
- Line cord
- Two dual-link DVI-D cards
- 3D sync cable
Optional accessories
- Coarse dust filter
- ILS lens adapter kit
- Stacking frame
- Dual HD/SDI input card
- Twin HDMI input card
- Dual-link DVI input card
- Video decoder input card*
*may not include 3D support
Operating environment
- Operating temperature: 40-104°F (5-40°C)
- Humidity (non-condensing): 20-80% non-condensing
Regulatory approvals
- UL/CSA/IEC 60950 (3rd edition)
- FCC Class A, CE, CCC
- This product conforms to all relevant European directives, standards, safety, health and environmental concerns
- RoHS, WEEE
Warranty
- 3 years parts and labor (including light engine)
