Specifications:
Overall System
- Operating Frequencies 2.4 GHz ISM band
- Frequency Response 20 Hz to 20 kHz Depending on microphone type
- Operating Range 60 m (200′) Open range env. with no interfering signals
- Dynamic Range >109 dB (A-weighted), typical
- Total Harmonic Distortion <0.05% typical
- Operating Temperature Range 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures
- Audio Sampling 24 bit / 48 kHz
- Latency 3.8 ms
Receiver
- Receiving System Diversity (frequency/time/space)
- Output Connectors (Microphone) Remote Receiver Connector: RJ45
- Link Connector: RJ12
- Maximum Output Level XLR, balanced: 0 dBV 1/4″ (6.3 mm), unbalanced: +6 dBV
- Power Supply 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external
- Dimensions 209.8 mm (8.26″) W x 44 mm (1.73″) Hx 169.3 mm (6.67″) D
- Weight 940g
- Accessories Included Included AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet
Handheld Transmitter
- RF Power Output 10 mW
- Spurious Emissions Following federal and national regulations
- Battery Type Two 1.5V AA (not included)
- Battery Life >7 hours (alkaline) (Depending on battery type and use pattern)
- Dimensions 254.8 mm (10.03″) long, 50.0 mm (1.97″) diameter
- Net Weight 280g
- Accessories Included AT8456a Quiet-Flex™ stand clamp
Belt Pack
- RF Power Output 10 mW
- Spurious Emissions Following federal and national regulations
- Input Connections Four-pin Locking Connector,
- Pin 1: GND,
- Pin 2: INST INPUT,
- Pin 3: MIC INPUT,
- Pin 4: DC BIAS +9V
- Battery Type Two 1.5V AA
- Battery Life >7 hours (alkaline) Depending on batt. type & use pattern
- Dimensions 70.2 mm (2.76″) W x 107.0 mm (4.21″) H x 24.9 mm (0.98″) D
- Net Weight 100g