Specifications:
- Element Fixed-charge back plate permanently polarized condenser
- Polar Pattern Cardioid
- Frequency Response 200 – 15,000 Hz
- Open Circuit Sensitivity Phantom : –43dB (7.0mV), re 1V at 1Pa
- Battery : –46dB (5,0mV), re 1V at 1Pa
- Impedance Phantom 200 Ω – Battery 250 Ω
- Maximum Input Sound Level Phantom: 131 dB SPL, 1 kHz at 1% T.H.D. – Battery: 115 dB SPL, 1 kHz at 1% T.H.D.
- Low Frequency Roll Off 80 hz, 12 dB/octave
- Switches Flat, roll-off (recessed)
- Dynamic Range Phantom: 100dB,1 kHz at max SPL – Battery: 84dB ,1 kHz at max SPL
- Signal-to-Noise Ratio 63dB, 1 kHz at 1Pa
- Phantom Power Requirements 11- 52V DC, 2 mA typical
- Battery Type 1.5V AA-UM3
- Battery Current/Life 0.4 mA typical / 1200 hours (alkaline battery)
- Weight Microphone 0.9 g – Power module 102 g
- Dimensions Microphone 23.0 mm long, 5.3 mm diameter – Power Module 145.0 mm long, 21.0 mm diameter
- Output Connector Integral 3-pin XLRM-type
- Cable 3.0 m long (permanently attached to microphone), 2.0 mm diameter, 2-conductor, shielded cable with TA3F output connector that mates with TB3M jack on power module
- Accessories Included AT8537 power module; AT8439 cable clip; clothing clip base; viper clip base; magnet clip base and plate with lanyard; three single mic holders; two double mic holders; two windscreens;
- battery; protective carrying case
