Kuumakse al. 
Specifications:
- ELEMENT Externally-polarized (DC bias) condenser
- POLAR PATTERN Cardioid and Figure-of-eight
- FREQUENCY RESPONSE 20-18,000 Hz
- LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
- OPEN CIRCUIT SENSITIVITY Stereo 90°: -42 dB (7.9 mV) dB re 1V at 1 Pa
- Stereo 127°: -41 dB (8.9 mV) dB re 1V at 1 Pa Mid: -36 dB (15.8 mV) dB re 1V at 1 Pa Side: -36 dB (15.8 mV) dB re 1V at 1 Pa
- IMPEDANCE 50 ohms
- MAXIMUM INPUT SOUND LEVEL Mid and Side: 149 dB SPL, 1 kHz at 1% T.H.D.;
- 159 dB SPL, with 10 dB pad (nominal)
- NOISE Stereo 90°: 25 dB SPL
- Stereo 127°: 16 dB SPL Mid: 15 dB SPL Side: 17 dB SPL
- DYNAMIC RANGE (typical) Mid: 134 dB, 1 kHz at Max SPL Side: 132 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO Stereo 90°: 69 dB, 1 kHz at 1 Pa
- Stereo 127°: 78 dB, 1 kHz at 1 Pa Mid: 79 dB, 1 kHz at 1 Pa Side: 77 dB, 1 kHz at 1 Pa
- PHANTOM POWER REQUIREMENTS 48V DC, 6.4 mA typical (both channels total)
- SWITCHES 90°, 127°, M-S;
- Flat, roll-off; 10 dB pad (nominal)
- WEIGHT 517 g (18.2 oz)
- DIMENSIONS 193.0 mm (7.60″) long, 53.4 mm (2.10″) maximum body diameter
- OUTPUT CONNECTOR Integral 5-pin XLRM-type
- CABLE 5.0 m (16.5′) long, 8-conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output end
- ACCESSORIES FURNISHED AT8449a shock mount for 5/8″-27 threaded stands; microphone dust cover; protective carrying case
- AUDIO-TECHNICA CASE STYLE R1
