Specifications:
OVERALL SYSTEM SPECIFICATIONS
- Operating Frequencies Band L: 575.000 to 608.000 MHz, 1321 frequencies
- Band M: 614.000 to 647.000 MHz, 1321 frequencies DISCONTINUED IN NORTH AMERICA
- Not all frequency bands available in all areas. Please check with local regulations.
- Minimum Frequency Step 25 kHz
- Modulation Mode FM stereo
- Maximum Deviation ±40 kHz
- Dynamic Range 90 dB (typical), A-weighted
- Total Harmonic Distortion <1% at (1 kHz, ±20 kHz Deviation)
- Operating Range 100 m (300′), typical
- (Open range environment with no interfering signals.)
- Operating Temperature Range -5° C (23° F) to +50° C (122° F)
- (Battery performance may be reduced at very low temperatures.)
- Frequency Response 60 Hz to 13 kHz (+/- 3 dB)
- Simultaneous Use 16 channels per band (maximum recommended)
- For assistance with multi-band operation or other frequency coordination issues, please contact you regional Audio-Technica customer service representative.
RECEIVER SPECIFICATIONS
- Receiving System Double conversion superheterodyne
- RF Sensitivity 20 dBuV (at 60 dB S/N ratio, 50 ohms termination)
- Headphone Output Connector 3.5 mm TRS stereo phone jack
- Headphone Output Power 65 mW (at 32 ohms)
- Antenna Input SMA-type, 50 ohms
- Aux Input Connector 3.5 mm TRS stereo phone jack
- Batteries 2 x 1.5V AA (not included)
- Battery Life 8 hours (alkaline)
- Depending on battery type and use pattern
- Dimensions 70.0 mm (2.76″) W x
- 25.0 mm (0.98″) D x
- 110.0 mm (4.33″) H
- Net Weight 133 g (4.7 oz), without batteries
- Accessories Included EP3 earphone; flexible antenna
TRANSMITTER SPECIFICATIONS
- RF Power Output 10 mW/50 mW (switchable), 50 ohms
- Limited to 10 mW within 863 MHz to 865 MHz
- Following national regulations
- Spurious Emissions Following federal and national regulations
- Input Connections XLRF-type/6.3 mm stereo (1/4″) combination connector
- Pin 1 and Sleeve: Ground
- Pin 2 and Tip: Hot
- Pin 3 and Ring: Cold
- Maximum Input Level XLRF-type/6.3 mm stereo, (1/4″) balanced: +26 dBu
- 6.3 mm (1/4″) mono, unbalanced: +26 dBu
- Loop Output Connector XLRM-type connector
- Pin 1: Ground
- Pin 2: Hot
- Pin 3: Cold
- Power Requirement 12-18V DC, 600 mA
- Headphone Output Connector 6.3 mm (1/4″) TRS stereo phone jack
- Headphone Output Power 120 mW at 32 ohms
- Antenna Connector BNC, 50 ohms
- Dimensions 210.0 mm (8.30″) W x
- 132.0 mm (5.20″) D x
- 44.0 mm (1.70″) H
- Net Weight 930 g (32.8 oz), without accessories
- Accessories Included AC adapter (country dependant); rack mount adapters; flexib
